Customer Photos

I really enjoy seeing and sharing customer photos. Below are some photos from a very good customer in eastern Washington. The absolutely wonderful buck in the last photo weighed 175 lbs. field dressed ! I think the knife in the first two photos is the third or fourth knife I made. I also made a caping knife, shown elsewhere on this blog, for this customer that was my first special request. Both these knives are in their second season of use and to quote their owner, "They are my favorite tools in my tool box".

This fall, I have a bunch of knives that will be seeing their first use in the field and I would like to encourage their owners to send photos as well as feedback on their performance. As always, I can be reached at baumgartknives@gmail.com

Thank you R.R for the photos.

Enjoy!
Lee

Cocobolo Semi- Skinner

Below is another Semi-Skinner. This one has Cocobolo scales. I ground this blade very thin and since I was curious about its cutting ability (which I thought would be good), I decided to sharpen it before I made its sheath (which I normally don't do). I just used it to slice a piece of 8-9 oz. leather and it was like I was slicing thorough a piece of paper! Now, I just have to be very careful as I craft its sheath.



I can be reached at baumgartknives@gmail.com

THIS KNIFE IS SOLD.

Here are a couple more websites I enjoy:

http://www.heritageguns.co.uk/hgframset.htm
I am signed up for Toby's newsletter and enjoy the updates, especially the updates on Moss the Delinquent Labrador.
http://www.assra.com/cgi-bin/yabb/YaBB.pl
I really like single shot rifles. I blame this, as well as my fondness for beer, cheese, and sausage on my German heritage.



Lastly, I have had a desire to build a 35 Whelen on a Mauser action for some time. If anyone has a 98 Mauser action that hasn't been cobbled up (drilled, ground, otherwise altered), I would be interested in trading some knife work.

New Model

As I alluded to in my last post I have been working on a new model. Below is my latest offering, a Semi-skinner. The specifications are as follows:

Overall length: 7 1/2"
Blade Length: 3 1/2"
Blade: 1/8" O1
Handle: Amboyna burl
Sheath: 8-9 oz. leather, hand stitched

 

 

If you have any questions or comments, I can be reached at baumgartknives@gmail.com

Lee
 

Latest Work...

Here are some knives I have completed recently ...

This knife was made for a repeat customer. The handle is stabilized Buckeye burl. The sheath was something new for me... It sits horizontally on the belt and is cross-draw.

A couple of Caping knives. The top knife has a desert Ironwood handle and the bottom knife has a stabilized spalted Tamarind handle.

Another look at the Tamarind Caper...

A couple of Tiger Myrtle knives for a repeat customer. The wood for these knives was provided by Cecil Fredi.

New Model Coming

I am currently working on a new model that I am pretty excited about. It is a semi-skinner with  a finger groove. The first one will have a beautiful Amboyna burl handle. Once I have completed it, I'll post photos.

If you are interested in having a custom knife made I can be reached at baumgartknives@gmail.com

Have a safe and enjoyable holiday!

Lee

A Pair

I just completed the knives below for a customer. The top knife has a fiddleback Myrtle handle and the bottom knife has a tiger Myrtle handle. The customer has rifles stocked in both woods and wanted knives to go along with them. This hard-to-find wood was provided by Cecil Fredi, who I believe also stocked the customer's rifles. Here is a link to Cecil's website: http://www.gunstockblanks.com/

I enjoy custom orders, so if you have something special in mind, I can be reached at: baumgartknives@gmail.com

Proud Parents

My wife Linda and I recently traveled to Cape May, New Jersey to watch our youngest son's Coast Guard graduation. In addition to graduating, he received an award for having the highest academic score among his graduating class.

Our oldest son served four years in the Marine Corps, including a tour in Iraq.

We are very proud of both our boys and their commitment to their country.

Semper Paratus and Semper Fidelis!!!

Myrtle Wood General Purpose Knife, Handle Finish, Knife Tests

Below is the last knife completed in my most recent batch of knives. The handle is figured, dark Myrtle wood.

THIS KNIFE IS SOLD

Handle Finish
The handle on the knife above was finished with a Cyanoacrylate adhesive, better known as Super Glue. Super Glue has been used for finishing wood for quite some time. It is especially popular with wood turners. The more I research it, the more I am sold on it as a finish for un-stablizied wood handles. The first coat penetrates the wood and seals it, while subsequent coats fill the pores. If done properly, the wood will take on an amazing luster after multiple coats, sandings, and final polish. Prior to using Super Glue I was using Tru-Oil. On oily woods like cocobolo, bocote, and ironwood, Tru-Oil takes forever to dry. It would also take a month of Sundays to fill the pores of a porous wood like wenge with Tru-Oil.




Blade Magazine Knife Tests
This month's Blade magazine has an interesting knife test created by knife maker Warren Osborne. Twelve known knife makers made the same knife, but used different steels. The steels were some of the new and popular powdered metals. The knives were all sharpened by the same person, given the same bevel, then given to a wild game processor for testing. The tester used the knives to skin deer and kept track of the number of deer skinned until the cutting edge needed to be touched-up.

The three top performing steels (CPM M4, CPM S90V, CPM 110V) skinned between 8 and 15 deer before needing touch-up. Unfortunately, these steels are hard on the maker and extremely difficult to resharpen. CPM 154 was tied for third place with eight deer and is user friendly. From there the number of deer skinned progressively went down to a total of 3 before touch-up was required.

I think this type of test has more validity than many of the knife tests published. I would recommend picking up the August 14' Blade magazine for more detail.

For an explanation of the powdered metal process, here is a link to Crucible's website: http://www.crucibleservice.com/eselector/general/generalpart3.html

Odds and Ends

I had been wanting to scan these photos for a while and finally figured out how to work my son's scanner. The photos were taken 21 years ago in the Alaska range. I'm on the left in the photo and Ron Warren is on the right. At the time, Ron was the youngest registered guide in Alaska. He stayed in the business and currently owns/runs Alaska Guide Service. The sheep was taken by Jay Link of Jack Link's Beef Jerky fame. I was the packer on this hunt

The next photo was taken during the same season. For this client, Ken Fanning was the guide and I was the packer. The sheep was taken with a muzzle loader.

When I have more time I'll scan some more photos and post them. I have one of an absolutely huge wolf track I came across while we were hunting brown bear...

My Guarantee

I haven't stated this before because I felt it was obvious, but given the state of our current "disposable society" and questionable business practices, I thought I should. All my knives are 100% guaranteed under normal field conditions. My knives are designed for processing game animals and birds. If one of my knives fails while doing this, I will replace it free of charge.

 However, if you are overcome with a strong desire to see if you can stick one of my blades through a car door (Don't laugh, I have seen published knife tests were this was done.) or you realize you forgot your hatchet and need kindling and decide to split it by pounding on the spine of the blade and damage the knife, that's on you.

Bottom line, I take pride in my work and stand behind it when it is used for it's intended purpose.

Things of Interest

Just some links to things I find interesting...

Since the early 80's I have been a big fan of Ross Seyfried. Here are a couple of links to articles written by him:

http://www.bowenclassicarms.com/news/articles/World%27s_Ultimate_Revolver.pdf

http://www.riflemagazine.com/magazine/article.cfm?tocid=321&magid=24

Forums I enjoy:
http://knifedogs.com/forum.php
http://www.doublegunshop.com/forums/ubbthreads.php
http://forums.accuratereloading.com/eve

And lastly a few bullet makers and custom gunsmiths
http://www.northforkbullets.com/magento/
http://www.grizzlycartridge.com/store/index.php?app=cms&ns=splash
http://www.customgunandrifle.com/
http://www.bertramandco.com/
http://www.martiniandhagngunmakers.com/index.htm
http://www.bowenclassicarms.com/
http://echolsrifles.blogspot.com/

Available Knives 05/03/14

I just finished two more general purpose knives.
BOTH KNIVES ARE SOLD.

 Wenge Handle

Cocobolo Handle